Skip to main content

Charging

Charging the BLEShark Nano is simple, but there are a few things to know to make sure it works as expected.

Basic Charging Steps​

  • Set the side switch to ON before plugging in. The device will not charge if it's OFF.
  • Connect a USB-C cable to the port on the BLEShark Nano.
  • Look for the red LED indicator next to the USB port to confirm charging.

What the Red LED Means​

  • Solid Red - Charging is active.
  • No Light (while plugged in, switch ON) - Charging is complete.
  • Dim or Flickering - Most likely, the switch is not flipped to ON. If it is, check for a loose cable or weak power source.
Tips and Troubleshooting
  • Use a good quality USB-C cable and a stable 5V adapter.
  • Avoid charging through old laptops or underpowered USB ports.
  • If the device doesn't turn on after charging, try another cable or port.
  • Do not charge near water or in very hot environments.